1 of 6 functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2012, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . ordering information rf1 gnd rf2 gnd vrf1 rfc vrf2 1 2 4 3 8 7 6 5 gnd RFSW8000 2.5v to 5.0v, 5mhz to 6500mhz 10w spdt switch the RFSW8000 is a high power single-pole do uble-throw (spdt) switch designed for high performance wireless applications. th is wideband switch has been designed for use from 5mhz to 6.5ghz, where extremely high linearity, high isolation, low insertion loss, and small package size are required. switching for the RFSW8000 is controlled via two control voltage inputs. the RFSW8000 is manufactured in a phem t gaas process and packaged in an 8- pin, 2.0mm x 2.0mm quad-flat no-lead (qfn) plastic package. features ? single voltage: 2.5v to 5.0v ? 40dbm p1db ? 30db isolation at 2ghz applications ? ieee 802.11a/n wifi systems ? ieee 802.16 wimax systems ? customer premise equipment (cpe) ? wireless access points, gateways and router applications ? ism band transmitter applications ds130530 package: qfn, 2mm x 2mm x 0.55mm RFSW8000 2.5v to 5.0v, 5mhz to 6500mhz RFSW8000-410 RFSW8000 eval board (100mhz to 2000mhz) and 5-piece bag RFSW8000-411 RFSW8000 eval board (2000mhz to 4500mhz) and 5-piece bag RFSW8000-412 RFSW8000 eval board (4500mhz to 6500mhz) and 5-piece bag RFSW8000sb 5-piece bag RFSW8000sr 100-piece reel RFSW8000tr7 2500-piece reel RFSW8000sq 25-piece bag free datasheet http://
2 of 6 RFSW8000 ds130530 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . absolute maximum ratings parameter rating unit supply voltage (rf applied) -0.5 to +5.0 v supply voltage (no rf applied) -0.5 to +5.0 v dc supply current 10 ma input rf power +40* dbm max input power, ofdm modulated, 3:1 load vswr +36 dbm operating ambient temperature -40 to +85 c storage temperature -40 to +150 c moisture sensitivity msl2 *note: maximum input power with a 50 load. parameter specification unit condition min. typ. max. typical conditions temp = 25c, vc = 3.0v unless otherwise noted performance - low band optimized at 700mhz to 950mhz frequency 100 2000 mhz insertion loss 0.4 0.6 db input p0.1db 39 40 dbm at higher v control , p0.1db will be improved input return loss 20 25 db isolation 26 29 db harmonics (2nd, 3rd) 80 dbc at p out = 30dbm iip3 59 dbm performance - mid band optimized at 2.1ghz to 2.7ghz frequency 2000 4500 mhz insertion loss 0.55 0.65 db in optimized frequency band 0.95 db in full frequency band input p0.1db 39 40 dbm at higher v control , p0.1db will be improved input return loss 15 20 db isolation 26 29 db harmonics (2nd, 3rd) 80 dbc at p out = 30dbm iip3 59 dbm performance - high band optimized at 5.1ghz to 5.9ghz frequency 4500 6500 mhz insertion loss 0.85 1 db in optimized frequency band input p0.1db rf1 to rfc 35 36 dbm at higher v control , p0.1db will be improved input p0.1db rf2 to rfc 37 38 dbm at higher v control , p0.1db will be improved input return loss 14 20 db isolation 24 25.5 db harmonics (2nd, 3rd) 80 dbc at p out = 30dbm iip3 55 dbm switching switching speed high 300 500 nsec 50% ctl to 90/10% rf switching speed low 100 300 nsec 90/10% rf to 10/90% rf caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. ex tended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the device under absolute maximum rating condi- tions is not implied. the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro device s, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. rfmd green: rohs compliant per eu directive 2011/65/eu, halogen free per iec 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. free datasheet http://
3 of 6 RFSW8000 ds130530 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . RFSW8000 control truth table pin out parameter specification unit condition min. typ. max. control voltage control voltage high 2.5 3 5 v control voltage low 0.2 v control current 5 a generic performance esd human body model 250 v eia/jesd22-114a rf pins 500 v eia/jesd22-114a dc pins charge device model 1000 v jesd22-c101c all pins switch status logic control rf1 to rfc rf2 to rfc vrf1 vrf2 on off high low off on low high pin names and description pin function description 1rf1 rf port 1, is internally matched to 50 . 2gnd ground connection. 3gnd ground connection. 4rf2 rf port 2, is internally matched to 50 . 5vrf2 logic control for rf2 port. 6gnd ground connection. 7rfc rf common port, is internally matched to 50 . 8vrf1 logic control for rf1 port. pkg base gnd ground connection. the back side of the package sh ould be connected to the ground plane through as short connection as possible. pcb vias under the device are recommended. 1 2 4 3 8 7 6 5 free datasheet http://
4 of 6 RFSW8000 ds130530 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . package drawing pcb design requirements 2.0000.100 0.550.050 0.9000.100 1.7000.100 0.500 bsc 0.300.050 2.0000.100 0.152 ref 0.200.050 bottom view side view top view pin#1 id r0.20 free datasheet http://
5 of 6 RFSW8000 ds130530 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . evaluation board layout RFSW8000 dc block values tune band freqency range c1 c2 c3 RFSW8000-410 100mhz to 2000mhz 1.0nf 1.0nf 1.0nf RFSW8000-411 2000mhz to 4500mhz 33pf 33pf 33pf RFSW8000-412 4500mhz to 6500mhz 2.0pf 2.0pf 2.0pf 1 2 3 vcc2 hdr_1x3 p1 j2 rx1 j3 rx2 c4 1000pf vcc2 vcc1 1 2 4 3 8 7 6 5 c1 * pf j2 rx1 c2 * pf c3 * pf 1 2 3 vcc1 hdr_1x3 p2 c5 1000pf free datasheet http://
6 of 6 RFSW8000 ds130530 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . performance plots: 100mhz to 1000mhz performance plots: 1000mhz to 4500mhz performance plots: 4500mhz to 6500mhz 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 100 200 300 400 500 600 700 800 900 1000 d b freqency(mhz) insertionloss(db) 100mhzto1000mhz v cc1 =3.0v,v cc2 =0v;25c il(db) 50 45 40 35 30 25 20 15 10 5 0 0 100 200 300 400 500 600 700 800 900 1000 d b frequency(mhz) returnlossandisolation(db) 100mhzto1000mhz v cc1 =3.0v,v cc2 =0v;25c rl(db) rf1rf2isolation(db) rf2rf1isolation(db) 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 1000 1500 2000 2500 3000 3500 4000 4500 d b freqency(mhz) insertionloss(db) 1000mhzto4500mhz v cc1 =3.0v,v cc2 =0v;25c il(db) 45 40 35 30 25 20 15 10 5 0 1000 1500 2000 2500 3000 3500 4000 4500 d b frequency(mhz) returnlossandisolation(db) 1000mhzto4500mhz v cc1 =3.0v,v cc2 =0v;25c rl(db) rf1rf2isolation(db) rf2rf1isolation(db) 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 4500 5000 5500 6000 6500 d b freqency(mhz) insertionloss(db) 4500mhzto6500mhz v cc1 =3.0v,v cc2 =0v;25c il(db) 30 25 20 15 10 5 0 4500 5000 5500 6000 6500 d b frequency(mhz) returnlossandisolation(db) 4500mhzto6500mhz v cc1 =3.0v,v cc2 =0v;25c rl(db) rf1rf2isolation(db) rf2rf1isolation(db) free datasheet http://
|
